Computer Preventive Maintenance Guide
Help your computer live longer,
perform better, and avoid debilitating crashes.
Kirk Steers- PC World - June 2004"Take good
care of your PC, and it will take good care of you."
It's a nice sentiment, but reality is more like "Take
good care of your PC, and it won't crash, lose your data, and cost you
your job--probably." Follow these steps to stop PC problems before
they stop you.
Your PC's two mortal enemies are heat and moisture.
Excess heat accelerates the deterioration of the delicate circuits in
your system. The most common causes of overheating are dust and
dirt: Clogged vents and CPU cooling fans can keep heat-dissipating air
from moving through the case, and even a thin coating of dust or dirt
can raise the temperature of your machine's components.
Any grime, but especially the residue of cigarette
smoke, can corrode exposed metal contacts. That's why it pays
to keep your system clean, inside and out.
If your PC resides in a relatively clean, climate-controlled
environment, an annual cleaning should be sufficient. But in most
real-world locations, such as dusty offices or shop floors, your system
may need a cleaning every few months.
All you need are lint-free wipes, a can of compressed
air, a few drops of a mild cleaning solution such as Formula 409 or
Simple Green in a bowl of water, and an antistatic wrist strap to protect
your system when you clean inside the case.
Your pc should never get this dirty....if it does....clean
it or get with me and I will clean it.
Think Outside the Box
Before you get started cleaning, check around your PC for anything nearby
that could raise its temperature (such as a heating duct or sunshine
coming through a window). Also clear away anything that might
fall on it or make it dirty, such as a bookcase or houseplants.
Always turn off and unplug the system before you
clean any of its components. Never
apply any liquid directly to a component. Spray or pour the liquid on
a lint-free cloth, and wipe the PC with the cloth.
Clean the case:
Wipe the case and clear its ventilation ports of any obstructions.
Compressed air is great for this, but don't blow dust into the PC or
its optical and floppy drives. Keep all cables firmly attached
to their connectors on the case.
Maintain your
mechanical mouse: When a non-optical mouse gets dirty, the pointer
moves erratically. Unscrew the ring on the bottom of the unit
and remove the ball. Then scrape the accumulated gunk off the
two plastic rollers that are set 90 degrees apart inside the ball's
housing.
Keep a neat keyboard:
Turn the keyboard upside down and shake it to clear the crumbs
from between the keys. If that doesn't suffice, blast it (briefly)
with compressed air. If your keys stick or your keyboard is really
dirty, pry the keys off for easier cleaning. Computer shops have
special tools for removing keys, but you can also pop them off by using
two pencils with broken tips as jumbo tweezers--just be sure to use
a soft touch.
Make your monitor
sparkle: Wipe the monitor case and clear its vents of obstructions,
without pushing dust into the unit. Clean the screen with a standard
glass cleaner and a lint-free cloth. If your monitor has a degauss
button (look for a small magnet icon), push it to clear magnetic interference.
Many LCDs can be cleaned with isopropyl alcohol; check with your LCD
manufacturer. Wipe your LCD lightly: The underlying glass is fragile.
Check your power
protection: Reseat the cables plugged into your surge protector.
Check the unit's warning indicator, if it has one. Surge protectors
may power your PC even after being compromised by a voltage spike (making
your system susceptible to a second spike). If your power protector
doesn't have a warning indicator and your area suffers frequent power
outages, replace it with one that has such an indicator and is UL 1449
certified.
Swipe your CD
and DVD media: Gently wipe each disc with a moistened, soft cloth.
Use a motion that starts at the center of the disc and then moves outward
toward the edge. Never wipe a disc in a circular motion.
Inside the Box
Before cracking open the case, turn off the power and unplug your PC.
Ground yourself before you touch anything inside to avoid destroying
your circuitry with a static charge. If you don't have a grounding
wrist strap, you can ground yourself by touching any of various household
objects, such as a water pipe, a lamp, or another grounded electrical
device. Be sure to unplug the power cord before you open the case.
Use antistatic wipes to remove dust from inside the
case. Avoid touching any circuit-board surfaces. Pay close
attention to the power-supply fan, as well as to the case and to CPU
fans, if you have them. Spray these components with a blast of
compressed air to loosen dust; but to remove the dust rather than rearrange
it, you should use a small vacuum like the $12 Belkin MiniVak.
If your PC is more than four years old, or if the
expansion cards plugged into its motherboard are exceptionally dirty,
remove each card, clean its contacts with isopropyl alcohol, and reseat
it. If your system is less than a couple years old, however, just
make sure each card is firmly seated by pressing gently downward on
its top edge while not touching its face. Likewise, check your
power connectors, EIDE connectors, and other internal cables for a snug
fit.
While you have the case open, familiarize yourself
with the CMOS battery on the motherboard. For its location, check
the motherboard manual. If your PC is more than four or five years
old, the CMOS battery may need to be replaced. (A system clock
that loses time is one indicator of a dying CMOS battery.)
Look for Trouble
Give your PC a periodic checkup with a good hardware diagnostic utility.
Two excellent choices are Sandra Standard from SiSoftware and #1-TuffTest-Lite
from #1-PC Diagnostics. Go to PC World's download page to download
the free version of Sandra (the full version of the application costs
$35) or to download #1-TuffTest-Lite (the fully functional version is
$10).
Adding and removing system components leaves orphaned
entries in the Windows Registry. This can increase the time your
PC takes to boot and can slow system performance. Many shareware
utilities are designed to clean the Registry, but my favorite is Registry
Drill from Easy Desk Software. The program is free to try and
$40 to keep. Go to PC World's download page to download a trial copy
of Registry Drill.
Windows stores files on a hard drive in rows of contiguous
segments, but over time the disk fills and segments become scattered,
so they take longer to access. To keep your drive shipshape, run
Windows' Disk Defragmenter utility. Click Start, Programs (All
Programs in XP), Accessories, System Tools, Disk Defragmenter.
If your drive is heavily fragmented, you could boost performance.
Defragging may take hours, however. Disable your screen saver
and other automatic programs beforehand to keep the defrag from restarting
every few minutes.
Disk Defragmenter won't defragment the file on your
hard drive that holds overflow data from system memory (also known as
the swap file). Since the swap file is frequently accessed, defragmenting
it can give your PC more pep. You can defragment your swap file
by using a utility such as the SpeedDisk program included with Norton
SystemWorks 2004, but there's a way to reset it in Windows.
In Windows XP, right-click My Computer
and choose Properties. Click Advanced, and then choose the Settings
button under Performance. Click Advanced again and the Change
button under Virtual Memory. Select another drive or partition,
set your swap file size, and click OK. Visit "Hardware Tips: Jog
Your Memory for Faster PC Performance" for instructions on moving your
swap file in other versions of Windows. If you have only one partition
and no way to create a second one, and you have at least 256MB of RAM,
disable the swap file rather than moving it: Select No paging
file in the Virtual Memory settings. If you have trouble booting,
start Windows in Safe Mode and re-enable this option.
Hard-Drive Checkup
Windows XP offers a rudimentary evaluation of your hard disk's health
with its error-checking utility: Right-click the drive's icon in Windows
Explorer and select Properties, Tools, Check Now. (Windows can
fix errors and recover bad sectors automatically if you wish.)
If the check discovers a few file errors, don't worry, but if it comes
up with hundreds of errors, the drive could be in trouble.
To conduct a more thorough examination, go to PC World's
download page and download Panterasoft's free HDD Health utility, which
monitors hard-drive performance and warns of impending disaster.
The program works only with drives that support S.M.A.R.T technology,
but nearly all drives released since 2000 are S.M.A.R.T.-compliant.
Many hardware and software designers humbly assume
you want their program running on your PC all the time, so they tell
Windows to load the application at startup (hence, the ever-growing
string of icons in your system tray). These programs eat up system
resources and make hardware conflicts and compatibility problems more
likely. To prevent them from launching, just click Start, Run,
type msconfig, and press Enter. The programs listed under the
Startup tab are set to start along with Windows. Uncheck the box
at the left of each undesirable program to prevent it from starting
automatically.
PC Maintenance: Four Tips for Longer PC Life
1. Keep your PC in a smoke-free environment. Tobacco smoke can
damage delicate contacts and circuits.
2. Leave your PC running. Powering
up from a cold state is one of the most stressful things you can do
to your system's components. If you don't want to leave your PC
running all the time, use Windows' Power Management settings to put
your machine into hibernation rather than completely shutting down.
In Windows XP, right-click the desktop and select Properties.
Click the Screen Saver tab and select the Power button. Choose
the Hibernate tab to ensure that hibernation is enabled, and then select
a time beneath 'System hibernates' under the Power Schemes tab.
(Note that this option is not available on all PCs.) Computers
running older versions of Windows may or may not provide similar power-management
features. Look under the Power Management icon (Power Options
in Windows 2000) in Control Panel to evaluate your machine's capabilities.
While our "Busting the Biggest PC Myths" feature says
that turning your PC off "does more good than harm," I find that my
PCs last longer when I keep them in hibernation.
3. Don't leave your monitor running.
The best way to extend your display's life is to shut it off when it's
not in use.
4. Avoid jostling the PC. Whenever
you move your system, even if it's just across the desktop, make sure
the machine is shut down and unplugged.